Penerapan Standar Keamanan pada Proses Pengelasan Industri Skala Kecil di Desa Balak Kecamatan Songgon
Abstract
This article discusses safety regulations during the welding process to reduce the risk of workplace accidents, long-term health consequences, and improve the quality of finished products. The study examines various international safety regulations, practical safety measures, and incidents involving welding. An important first step in increasing employee awareness and understanding of the potential risks that may arise during the welding process is safety socialization. Risks associated with welding include exposure to UV light, hazardous gases, sparks and high temperatures, which, if not managed appropriately, can jeopardize worker health and safety. Therefore, to ensure the best possible implementation of occupational safety standards, organized teaching initiatives through outreach are required. Personal protective equipment (PPE), safe work practices, handling of dangerous goods, risk mitigation and emergency response training are examples of socialization activities. A thorough understanding of welding safety is believed to reduce the number of workplace accidents, increase output, and make the workplace safer. This community service focuses on conducting welding and work safety training for home welding workshop businesses in Balak Village, Songgon District, Banyuwangi Regency. The application of safety standards to the welding process aims to evaluate the effectiveness of welding safety socialization in improving workers' compliance with safety procedures, while providing recommendations for optimizing future training programs.
References
A. Sebayang, E. Tarigan, F. F. Hasan, And A. Anasril, “Karakteristik Hasil Pengelasan Metal Inert Gas (Mig) Pada Plat Baja St 37 Dengan Variasi Arus 120 A, 130 A, 140a, Dan 150a,” Jpin J. Pendidik Indones., Vol. 5, No. 2, Art. No. 2, 2022, Doi: 10.47165/Jpin.V5i2.433.
M. A. P. Famoesa, P. I. Santosa, And E. Pranatal, “Pengaruh Variasi Sudut Kampuh V Pada Sambungan Las Fcaw Dari Material Baja Ss 400,” Pros. Semin. Teknol. Kebumian Dan Kelaut. Semit., Vol. 2, No. 1, Pp. 85–93, Jul. 2020, Doi: 10.31284/J.Semitan.2020.1018.
R. W. Lubis, S. Dharma, R. Rahmawaty, R. Sebayang, N. Bahri, And M. A. Aditya, “Analisis Pengaruh Variasi Logam Pengisi (Filler) Pada Proses Pengelasan Gtaw Paduan Aluminium Terhadap Uji Kekerasan Dan Struktur Mikro,” Sinergi Polmed J. Ilm. Tek. Mesin, Vol. 5, No. 2, Pp. 42–51, Sep. 2024, Doi: 10.51510/Sinergipolmed.V5i2.1581.
F. R. Afrianzah And F. Vietanti, “Analisa Pengaruh Variasi Arus Dan Jenis Elektroda Pengelasan Smaw Terhadap Cacat Las Dan Kekerasan Material Baja A36,” Pros. Senastitan Semin. Nas. Teknol. Ind. Berkelanjutan, Vol. 3, No. 0, Mar. 2023, Accessed: Nov. 20, 2024. [Online]. Available: Https://Ejurnal.Itats.Ac.Id/Senastitan/Article/View/4211
M. R. P. Suharto And A. Akbar, “Efficacy Of Regular Maintenance In Mitigating Industrial Equipment Deterioration:,” Procedia Eng. Life Sci., Vol. 5, Pp. 595–599, Mar. 2024, Doi: 10.21070/Pels.V7i0.1539.
S. R. Sinulingga, R. J. Sitorus, And I. G. Purba, “Manajeman Risiko Keselamatan Kerja Kegiatan Pengelasan (Welding) Pt. Pp. London Sumatra Indonesia Tbk Tirta Agung Palm Oil Mill,” J. Ilmu Kesehat. Masy., Vol. 3, No. 3, Art. No. 3, Nov. 2012, Accessed: Nov. 20, 2024. [Online]. Available: Https://Ejournal.Fkm.Unsri.Ac.Id/Index.Php/Jikm/Article/View/114
Y. Yusmita And H. Hasanah, “Penerapan Ergonomi K3 Dalam Proses Pengelasan,” J. Tek. Ind. Terintegrasi Jutin, Vol. 3, No. 2, Pp. 19–23, 2020, Doi: 10.31004/Jutin.V3i2.1348.
Y. Yusmita And H. Hasanah, “Penerapan Ergonomi K3 Dalam Proses Pengelasan,” J. Tek. Ind. Terintegrasi Jutin, Vol. 3, No. 2, Pp. 19–23, 2020, Doi: 10.31004/Jutin.V3i2.1348.
B. A. Munawar, S. Nurhaji, And H. Abdillah, “Analisis Penerapan K3 Pada Saat Pengoperasian Las Asetilin Di Maja Teknik Pandeglang,” J. Vocat. Educ. Automot. Technol., Vol. 5, No. 2, Art. No. 2, Dec. 2023, Doi: 10.31331/Joveat.V5i2.2663.
M. Arsyad Et Al., “Peningkatan Keterampilan Las Kelompok Pemuda Pajama Kayu Makassar,” Pros. Semin. Nas. Terap. Ris. Inov. Sentrinov, Vol. 9, No. 3, Art. No. 3, 2023.
D. Wahana, “Analisis Risiko Keselamatan Dan Kesehatan Kerja Welding Confined Space Bagian Erection Pt. Pal Indonesia (Persero) Surabaya,” Jun. 2018, Accessed: Nov. 20, 2024. [Online]. Available: Https://Repository.Unej.Ac.Id/Xmlui/Handle/123456789/85965
D. H. M. Mantiri, G. Y. Malingkas, And R. J. M. Mandagi, “| Jurnal Ilmiah Media Engineering,” Vol. 10, No. 2, Art. No. 2, Nov. 2020, Accessed: Nov. 20, 2024. [Online]. Available: Https://Ejournal.Unsrat.Ac.Id/Index.Php/Jime/Article/View/31236
Y. E. Sastrini, G. H. Pertiwi, And M. M. Khoiri, “Kesehatan Dan Keselamatan Kerja: Tinjauan Komprehensif,” Penerbit Tahta Media, Nov. 2023, Accessed: Nov. 20, 2024. [Online]. Available: Https://Tahtamedia.Co.Id/Index.Php/Issj/Article/View/496
T. Arianti, “Strategi Peningkatan Kesadaran Dan Implementasi K3 Di Industri Konstruksi: Upaya Menjaga Kesehatan Dan Keselamatan Kerja,” Arrazi Sci. J. Health, Vol. 1, No. 1, Art. No. 1, Jul. 2023.
L. Diatana, E. Darmawijaya, And F. Fauzan, “Work Safety Assurance System Of Welding Workshop Employees From Islamic Law And Labor Law Perspective: A Case Study Of Tanah Jambo Aye District :,” Petita J. Kaji. Ilmu Huk. Dan Syariah, Vol. 3, No. 1, Pp. 10–23, Apr. 2018, Doi: 10.22373/Petita.V3i1.29.
L. Yasmin, R. N. Faisal, And E. W. Dewi, “Analisis Penerapan Hygiene, Sanitasi, Dan Keselamatan Kerja Di Perusahaan Tour And Travel Kota Cirebon,” J. Sharia Tour. Hosp., Vol. 1, No. 2, Art. No. 2, Oct. 2023, Doi: 10.24235/Jetour.V1i2.31.
M. A. Tafui, A. U. Roga, And I. A. T. Hinga, “Faktor Yang Berhubungan Dengan Kecelakaan Kerja Dan Penyakit Akibat Kerja Pada Nelayan Pencari Teripang Di Kelurahan Namosain Kota Kupang,” Media Kesehat. Masy., Vol. 3, No. 3, Art. No. 3, Dec. 2021, Doi: 10.35508/Mkm.V3i3.3853.
M. Nur, “Analisis Sistem Kesehatan Dan Keselamatan Kerja Dengan Metode Ecfa Di. Pt Xyz,” Ind. Eng. J., Vol. 9, No. 2, Art. No. 2, 2020, Doi: 10.53912/Iejm.V9i2.565.
14311171 Devi Nurmelita Sari, “Pengaruh Keselamatan Kesehatan Kerja Dan Lingkungan Kerja Terhadap Kinerja Karyawan Dengan Kepuasan Kerja Sebagai Variabel Intervening Pada Pt Kusuma Nanda Putra,” Feb. 2019, Accessed: Nov. 20, 2024. [Online]. Available: Https://Dspace.Uii.Ac.Id/Handle/123456789/14509
N. F. Rachman, A. Aghastya, W. T. Adi, N. A. Imron, F. Rozaq, And M. Z. Arifin, “Pelatihan Keselamatan Kerja Dibidang Pengelasan Bengkel Rumahan Di Madiun,” Madiun Spoor J. Pengabdi. Masy., Vol. 2, No. 1, Pp. 52–57, Jun. 2022, Doi: 10.37367/Jpm.V2i1.209.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
