Pelatihan dan Pengenalan Elektronika Serta Dasar Koding Menggunakan Tinkercad di MAN Insan Cendekia Pekalongan

Joni Apriyanto; Prihastanto

doi:10.36526/tekiba.v5i2.5340

Authors

Joni Apriyanto Universitas Indraprasta PGRI, Jakarta
Prihastanto Universitas Indraprasta PGRI

DOI:

https://doi.org/10.36526/tekiba.v5i2.5340

Keywords:

Arduino, Electrical, Circuit, Coding, Tinkercad

Abstract

The development of Information and Communication Technology in the last few decades has experienced very rapid progress and has had a broad impact on various aspects of life, ranging from social, economic, health, to education. In the context of electrical engineering and coding education, various simulation-based digital learning platforms have begun to be widely used to replace or complement conventional practices. One such platform is Tinkercad, a web-based application that allows users to create virtual electronic circuit simulations and program microcontrollers such as Arduino. This platform is very suitable for use in the process of learning the basics of electronics and programming (coding) because the interface is simple and easy to understand for beginners. For this reason, the Community Service Activity of Indraprasta PGRI University was carried out by holding an introduction to coding training for electrical applications with Tinkercad for students of MAN Insan Cendekia Pekalongan and was carried out online. The purpose of this training is to introduce basic electricity and basic programming and its application in the world of electricity. The training method is in the form of lectures and practice in making simple electrical circuits and ends with making a traffic light project using Arduino programmed through the Tinkercad platform. The training participants were invited to understand the basic electrical concepts, get to know electrical components, understand the basic concepts of programming and compile circuits and program codes in stages. The results of the training showed an increase in students' understanding of the basic concepts of electricity, microcontrollers and programming. This training is expected to be the first step in encouraging digital literacy and technological skills for MAN IC Pekalongan students in the era of the industrial revolution 4.0.

References

[1] L. -H. L. T. B. e. a. Y. Wang, "Re-shaping Post COVID 19 Teaching and Learning: A Blueprint of Virtual-Physical Blended Classrooms in the Metaverse Era. DOI: https://doi.org/10.1109/ICDCSW56584.2022.00053. in 2022 IEEE 42nd International Conference on Distributed Computing Systems Workshops (ICDCSW), Bologna, 2022.

[2] I. B. M. F. N. Selfi Anggriani Saputri, "Peran Marketplace Dalam Meningkatkan Daya Saing UMKM di Indonesia. DOI: https://doi.org/10.51878/knowledge.v3i1.2199. KNOWLEDGE: Jurnal Inovasi Hasil Penelitian dan Pengembangan, vol. 3, no. 1, pp. 69-75, 2023.

[3] I. Zefri Alfaruqy, "Aplikasi Halodoc Sebagai Bentuk dari Konstruksi Sosial dalam Media Baru di Masa Pandemik Covid 19. DOI: https://doi.org/10.36418/syntax-literate.v7i2.6379. Syntax Literate: Jurnal Ilmiah Indonesia, vol. 7, no. 2, pp. 2835-2848, 2022.

[4] D. H. Hani Irawati, "Tranformasi Digital Dalam Pembelajaran Biologi di SMA Muhammadiyah Kota Yogyakarta DOI: https://doi.org/10.1234/abcd.v1i1.1001. Syntax Literate: Jurnal Ilmiah Indonesia, vol. 9, no. 1, pp. 332-340, 2024.

[5] Y. H. N. M. P. S. Maiia V. Marienko, "Personalization of learning using adaptive technologies and augmented reality DOI: https://doi.org/10.48550/arXiv.2011.05802. ArXiv, vol. 2731, pp. 341-356, 2020.

[6] S. Wahyuni, "Alternatif Media Pembelajaran Berbasis Perangkat Lunak Pada Bidang Elektro," http://dx.doi.org/10.22373/crc.v4i1.6275. CIRCUIT: Jurnal Ilmiah Pendidikan Teknik Elektro, vol. 4, no. 1, pp. 33-37, 2020.

[7] M. A. P. e. a. Ratnadewi, "Pembelajaran Rangkaian Listrik dengan Aplikasi TinkerCAD Circuit pada Akademisi di Indonesia - DOI: https://doi.org/10.29407/ja.v7i3.16831. ABDINUS: Jurnal Pengabdian Nusantara, vol. 7, no. 3, pp. 819-829, 2023.

[8] T. W. J. e. a. Maulana Muhammad Iqbal, "Pengembangan Modul Pembelajaran Menggunakan Aplikasi Electromechanical Systems Simulator Pada Mata Pelajaran Instalasi Motor Listrik di SMK Negeri 2 Surabaya. DOI: https://doi.org/10.26740/jpte.v11n01.p45-54. Jurnal Pendidikan Teknik Elektro, vol. 11, no. 01, p. Jurnal Pendidikan Teknik Elektro, 2022.

[9] D. R. E. K. Ridwan, "Efektivitas Penggunaan Simulasi dengan Multisim Berbantuan Virtual Laboratory untuk Meningkatkan Kemampuan Berpikir Kritis Mahasiswa Jurusan Pendidikan Teknik Elektro. DOI: https://doi.org/10.5678/efek.v2i2.2022. Jurnal Kiprah, vol. 9, no. 1, pp. 39-47, 2021.

[10] A. S. Ray Silva, "Sekitar Pendirian Sampai Periode Awal MAN Insan Cendekia Padang Pariaman: Studi Sejarah Lembaga. DOI: https://doi.org/10.24036/jk.v5i1.596. Kronologi, vol. 5, no. 1, pp. 101-116, 2023.

[11] M. S. Muhlisin, "The Implementation of Integrated Islamic Education Model at MAN Insan Cendekia Pekalongan. DOI: https://doi.org/10.9101/ijie.v3i1.3030. EDUKASIA ISLAMIKA Jurnal Pendidikan Islam, vol. 5, no. 1, pp. 68-87, 2020.

[12] D. Prihatmoko., "Penerapan Internet of Things (IoT) Dalam Pembelajaran di UNISNU Jepara. DOI: https://doi.org/10.24176/simet.v7i2.769. SIMETRIS, vol. 7, no. 2, pp. 567-574, 2016.

[13] J. D. I. F. A. Ari Kurnianto, "Penerapan IoT (Ineternet of Things) Untuk Controlling Lampu Menggunakan Protokol MQTT Berbasis WEB. DOI: https://doi.org/10.36040/jati.v6i2.5393. JATI (Jurnal Mahasiswa TeknikInformatika), vol. 6, no. 2, pp. 1153-1161, 2022.

[14] R. R. D. S. e. a. Junaidi Akbar, "Pelatihan Internet of Things (IoT) dalam peningkatan kompetensi siswa multimedia di SMK Perguruan Buddhi. DOI: https://doi.org/10.30738/ad.v7i1.16938. Abdimas Dewantara, vol. 7, no. 1, pp. 92-102, 2024.

[15] R. E. Mauludi Manfaluthy, "Pelatihan Internet of Things (IoT Trainer) Berbasis ESP8266 Pada SMK Al-Muhadhirin Bekasi," https://jurnal.umj.ac.id/index.php/semnaskat/article/view/5430 in Prosiding Seminar Nasional Pengabdian Masyarakat LPPM UMJ, Jakarta, 2019.

[16] I. S. A. S. e. a. Ni Made Seniari, "Pengenalan Rangkaian Listrik Sederhana Untuk Menumbuhkan Bajat dan Kreatifitas Siswa SD Pada Ilmu Kelistrikan. DOI: https://doi.org/10.29303/baktinusa.v3i1.47. Jurnal Bakti Nusa, vol. 3, no. 1, pp. 14-20, 2022.

[17] N. I. L. S. e. a. Arip Kristiyanto, "Pelatihan Pemrograman C++ Melalui Tinkercad Guna Meningkatkan Kemampuan Computational Thinking Siswa SMK 11 Kab. Tangerang. - DOI: http://doi.org/10.55338/jpkmn.v5i2.3362. Jurnal Pengabdian kepada Masyarakat Nusantara (JPkMN), vol. 5, no. 2, pp. 2776-2782, 2024.

[18] G. L. e. a. Loneli Costaner, "Implementasi Simulasi Elektronika dan Arduino Virtual Dengan Circuti Tinkercad - DOI: https://doi.org/10.31849/jcoscis.v2i2.9139. J-COSCIS. Journal of Computer Science Community Service, vol. 2, no. 2, pp. 2774-7581, 2022.

[19] W. C. M. e. a. Aan RestuMukti, "Perancangan Smart Home Menggunakan Konsep Internet of Things (IOT) Berbasis Microcontroller. DOI: https://doi.org/10.5281./5600/5.jupiter.2022.10. Jurnal JUPITER, vol. 14, no. 2, pp. 516-522, 2022.

[20] N. H. D. e. a. Alvin R. Kedoh, "Sistem Kontrol Rumah Berbasis Internet of Things (IoT) Menggunakan Arduino UNO. DOI: https://doi.org/10.35508/jme.v8i1.1403. Jurnal Media Elektro, vol. 8, no. 1.

[21] B. S. A. M. R. e. a. I.G.P.O. Indra Wijaya, "Rancang Bangun Smart Lighting Berbasis Arduino Untuk Meningkatkan Kemampuan Elektronika Kepada Sisw Sekolah Menengah Kejuruan. DOI: https://doi.org/10.31764/jmm.v8i4.24300. JMM (Jurnal Masyarakat Mandiri), vol. 8, no. 4, pp. 3551-3560, 2024.

[22] W. R. G. M. Z. Sofyan Islamy, "Penerapan IoT pada Prototipe Pengukur Tekanan Darah Non-InvasiveBerbasis ESP8266. DOI: https://doi.org/10.23887/jstundiksha.v12i3.56356. Jurnal Sains dan Teknologi, vol. 12, no. 3, pp. 823-832, 2023.