Processing of Plastics Waste into Fuel Oil by Communal Scale Pyrolysis Method in Kedungringin Village, Muncar, Banyuwangi

  • Prabuditya Bhisma Wisnu Wardhana Manufacturing Engineering Technology Department of Banyuwangi State Polytechnic
  • Agung Fauzi Hanafi Manufacturing Engineering Technology Department of Banyuwangi State Polytechnic
  • Asmar Finali Manufacturing Engineering Technology Department of Banyuwangi State Polytechnic
  • Mega Lazuardi Umar Manufacturing Engineering Technology Department of Banyuwangi State Polytechnic
  • Andrean Bagus Prasetyo Manufacturing Engineering Technology Department of Banyuwangi State Polytechnic
DOI: https://doi.org/10.36526/gandrung.v3i2.2008
Keywords: Pyrolysis, Plastic Waste, Fuel, Community Service

Abstract

Plastic waste is a big problem in society because it can pollute the environment. The purpose of this assisted village grant program is to apply plastic waste processing technology into fuels that can be used for household and small-scale industrial purposes for the residents of Kedungringin village. The activities of the assisted village grant program are carried out by observing partners, then identifying equipment needs and designing and fabricating pyrolysis equipment. After the fabrication process is complete, then it is continued with socialization and training for Kedungringin villagers. Reactor performing tests using 1.5 kg of polyethylene plastic waste were able to produce about ± 1.2 liters of oil and ± 200 grams of charcoal from plastic waste. We hoped that with this plastic waste processing tool, the problem of environmental pollution due to the accumulation of plastic waste can be solved without causing new problems.

References

Ermawati, R. (2011). Konversi Limbah Plastik sebagai Sumber Energi Alternatif. Jurnal Riset Industri, 257-263.
Pasae, Y., Bulo, L., Lande, C., & Allo, E. L. (2020). Pirolisis Sampah Plastik Polipropilena : Tinjauan Pengaruh Suhu Pada Reaktor Pirolisis Kapasitas 1kg/Batch. DynamicSainT, 939-944.
Rafli, R., Fajri, H. B., Jamaludhin, A., Azizi, M., Riswanto, H., & Syamsiro, M. (2017). Penerapan Teknologi Pirolisis Untuk Konversi Limbah Plastik Menjadi Bahan Bakar Minyak di Kabupaten Bantul. Jurnal Mekanika dan Sistem Termal, 1-5.
Surono, U. B., & Ismanto. (2016). Pengolahan Sampah Plastik Jenis PP, PET dan PE Menjadi Bahan Bakar Minyak dan Karakteristiknya. Jurnal Mekanika dan Sistem Termal, 32-37.
Syamsiro, M., & Ika, S. R. (2019). Penerapan Teknologi Pirolisis untuk Penanganan Sampah di Bumdes Panggung Lestari Kabupaten Bantul. Seminar Nasional Pengabdian kepada Masyarakat (SENIAS) (pp. 30-34). Pamekasan: Universitas Islam Madura.
Wardhana, P. B., & Saptoadi, H. (2016). Konversi Limbah Plastik Polietilen menjadi Bahan Bakar dengan Metode Pirolisis. DISPROTEK, 1-4.
Wardhana, P. B., Finali, A., & Hanafi, A. F. (2020). Pengembangan Reaktor Pirolisis Termal Limbah Plastik Skala Laboratorium. Jurnal Teknik Mesin - Elemen, 39-44.
Published
2022-07-27
How to Cite
Prabuditya Bhisma Wisnu Wardhana, Agung Fauzi Hanafi, Asmar Finali, Mega Lazuardi Umar, & Andrean Bagus Prasetyo. (2022). Processing of Plastics Waste into Fuel Oil by Communal Scale Pyrolysis Method in Kedungringin Village, Muncar, Banyuwangi. GANDRUNG: Jurnal Pengabdian Kepada Masyarakat, 3(2), 471-479. https://doi.org/10.36526/gandrung.v3i2.2008
Issue
Vol. 3 No. 2 (2022): GANDRUNG: Jurnal Pengabdian Kepada Masyarakat
Section
Articles

Copyright (c) 2022 GANDRUNG: Jurnal Pengabdian Kepada Masyarakat

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.