Pengaruh Jumlah Dan Sudut Sudu Vertikal Pada Cyclone Turbine Ventilator Terhadap Kenyamanan Thermal Ruangan
Abstract
In this study modifications to the cutting knife and rotational speed were carried out. With blade variations of 2mm, 3mm and 4mm and rotational speeds of 300, 900 and 1500 rpm. After the research process is carried out, the noodle product tests include the length of the noodles, thickness, and elongation values. For testing, the length and thickness of the noodles used a measuring device ruler and calipers and testing the value of elongation was done by tensile tests. The results of the study showed the percentage shrinkage of 0.0% noodle dough weight. This shows the test equipment is working optimally. The faster the rotation of the motor the difference between long and thick noodles tends to increase. This shows that the rotation speed influences the performance of the flattening machine and noodle dough cutter. The faster the motor rotation, the elongation value of noodles tends to decrease. This is due to the rotation speed of the motor that affects the occurrence of broken noodles. The greater the size of the noodles the risk of breaking up the noodles decreases. The faster the motor rotation, the greater the capacity produced.
uthors who publish with this journal agree to the following terms:
1. Copyright on any article is retained by the author(s).
2. The author grants the journal, the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
5. The article and any associated published material is distributed under the Commons Attribution 4.0 International License.
