Pengaruh Bentuk Penghalang Bervariasi Pada Proses Perpindahan Panas

  • Beni Anwarudin Universitas PGRI Banyuwangi
  • Gatut Rubiono Universitas PGRI Banyuwangi
  • Adi Pratama Putra Universitas PGRI Banyuwangi
DOI: https://doi.org/10.36526/v-mac.v7i1.1945

Abstract

Handling heat energy in the industrial world is very necessary. Heat exchangers have a fluid system that can be designed and developed using pipes. Heat transfer in a heat exchanger is a support for the performance of a heat exchanger to make it better. In this study, a heat exchanger was tested by placing a variety of barriers on the field of heat transfer flow and the addition of variations in the flow rate on the heat pipe. This test uses a aliran inch water flow pipe and a 2.5 inch iron tube pipe and a barrier material using aluminum. Based on the test results obtained a graph of varying heat transfer increases in each barrier. Differences in barrier variations and variations in water discharge greatly affect the value of heat transfer results. The purpose of this study was to look for the effectiveness and effect of adding a flow barrier to the performance of heat transfer in a heat exchanger.

Keywords: Heat Exchanger, Effectiveness of Heat Transfer Heat

Published
2022-04-26
How to Cite
AnwarudinB., RubionoG., & PutraA. P. (2022). Pengaruh Bentuk Penghalang Bervariasi Pada Proses Perpindahan Panas. V-MAC (Virtual of Mechanical Engineering Article), 7(1), 1 - 4. https://doi.org/10.36526/v-mac.v7i1.1945
Issue
Vol. 7 No. 1 (2022): V-MAC
Section
Artikel

uthors who publish with this journal agree to the following terms:

1. Copyright on any article is retained by the author(s).

2. The author grants the journal, the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.

3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

5. The article and any associated published material is distributed under the Commons Attribution 4.0 International License.