Pengaruh Diameter Lubang Udara Terhadap Dinamika Gelembung Udara Dalam Kolom Air

Authors

  • Roy Sardian Universitas PGRI Banyuwangi
  • Gatut Rubiono Universitas PGRI Banyuwangi
  • Anas Mukhtar Universitas PGRI Banyuwangi

DOI:

https://doi.org/10.36526/v-mac.v6i1.1294

Abstract

One important process in improving water quality is the aeration process. In carrying out this aeration process it is necessary to use a device called an aerator. The working principle of this tool  is to add dissolved oxygen in the water. This research was conducted using an aerator column with a height of 50 cm, a length of 25 cm and a width of 5 cm with freshwater and sea water media. the addition of variations in the form of air hole diameter (needle) with a variation of 1 mm, 1.5 mm and 2 mm and air discharge of 1, 2 and 3 liters / minute.  The results showed that the larger the needle diameter, the larger the diameter of the air bubbles in fresh water and sea air. The difference in media between freshwater and sea air affects the diameter of the air bubbles.

 

Keywords - aeration, aerator column, air bubbles

Downloads

Published

2021-04-20

How to Cite

[1]
R. . Sardian, G. . Rubiono, and A. Mukhtar, “Pengaruh Diameter Lubang Udara Terhadap Dinamika Gelembung Udara Dalam Kolom Air”, V-MAC, vol. 6, no. 1, pp. 5–7, Apr. 2021.

Issue

Vol. 6 No. 1 (2021): V-MAC

Section

Artikel

License

uthors who publish with this journal agree to the following terms:

1. Copyright on any article is retained by the author(s).

2. The author grants the journal, the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.

3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

5. The article and any associated published material is distributed under the Commons Attribution 4.0 International License.